2018年度

  1. 國府田将也, 古神義則, 清水隆志, “誘電体円柱共振器法を用いた導電性塗料の周波数依存性測定,” 電気学会研究発表会資料, EDD-18-047, pp.25-28, Apr. 2018.
  2. 高萩耕平, 古神義則, 清水隆志, “3Dプリンタによって出力されたABS平板の36GHz帯複素誘電率測定,” 電気学会研究発表会資料, EDD-18-048, pp.29-32, Apr. 2018.
  3. Takashi Shimizu, Yusaku Hirano, Yoshinori Kogami, “Frequency dependence measurement technique of the interface conductivity using a dielectric rod resonator sandwiched between copper-clad dielectric substrates,” Proceedings of 91th ARFTG Microwave Measurement Conf., June 2018.
  4. Kouhei Takahagi, Yoshinori Kogami, Takashi Shimizu, “Millimeter wave complex permittivity measurement of printed ABS plates by a FDM type 3D printer,” Proceedings of Thailand-Japan Microwave 2018 TJMW2018, YE-28, June 2018.
  5. Masaya Kokufuda, Yoshinori Kogami, Takashi Shimizu, “Effective relative conductivity measurement for a conductive paint using dielectric rod resonators,” Proceedings of Thailand-Japan Microwave 2018 TJMW2018, YE-34, June 2018.
  6. Yoshinori Kogami, Takashi Shimizu, Yu Mogami, “Millimeter Wave Complex Permittivity Measurements for the Flexible Dielectric Substrates Used with the Printed Electronics Technology,” Proceedings of the 40th Progress In Electromagnetics Research Symposium (PIERS) in Toyama, Aug. 2018.
  7. Yoshinori Kogami, Takashi Shimizu, “Evaluation of the Relative Permittivity of Dielectric Sheet Materials in Millimeter Wave Region Using TE111 Mode Cylindrical Cavity Resonator,” Proceedings of the 40th Progress In Electromagnetics Research Symposium (PIERS) in Toyama, Aug. 2018.
  8. Kota Tsunoda, Kentaro Takano, Takashi Shimizu, Yoshinori Kogami, “Complex Permittivity Evaluation for Uniaxial Anisotropic Dielectric Materials in Millimeter Wave Region Using the Whispering Gallery Mode Dielectric Disk Resonator,” Proceedings of the 40th Progress In Electromagnetics Research Symposium (PIERS) in Toyama, Aug. 2018.
  9. 佐々木隆文, 清水隆志, 古神義則, “50GHz帯TM010モード空洞共振器を用いた低εr樹脂材料の高精度比誘電率測定,” 2018電子情報通信学会ソサイエティ大会, C-2-53, p.68, Sept. 2018.
  10. Takashi Shimizu, Kosuke Goto, Yoshinori Kogami, “Development of a Narrowband 30-GHz Band Bandpass Filter with Coaxial Interface Using Coplanar Type H-slot Resonators,” 48th European Microwave Conf. Proc., Oct. 2018.
  11. Takashi Shimizu, “High-Precision Evaluation Techniques for MW & mmW Circuit Materials,” 1 Day Workshop in the 6th International Smart City Symposium 2018, Oct. 2018.
  12. Takashi Shimizu, Rintaro Sasaki, Yoshinori Kogami, “Study on a 6 GHz Band Cavity Resonator for Dielectric Plate Measurements by a Rapid Prototyping Technology,” The 6th International Smart City Symposium 2018, Oct. 2018.
  13. Takafumi Sasaki, Takashi Shimizu, Yoshinori Kogami, “Accurate Complex Permittivity Evaluation of Resin Rod for 3D Printer Using a 50 GHz Band TM010 Mode Cavity,” The 6th International Smart City Symposium 2018, Oct. 2018.
  14. Kentaro Takano, Kota Tsunoda, Takashi Shimizu, Yoshinori Kogami, “Complex permittivity evaluation of dielectric materials for millimeter wave circuit substrates with the Whispering-gallery mode resonator method,” 2018 Asia Pacific Microwave Conference Proceedings, TH1-IF-48, Nov. 2018.
  15. Takafumi Sasaki, Kohei Takahagi, Yoshinori Kogami, Takashi Shimizu, “Complex permittivity measurements for thermoplastic resin filaments for 3D printer using a 50GHz TM0m0 mode cavity resonator,” 2018 Asia Pacific Microwave Conference Proceedings, TH1-IF-49, Nov. 2018.
  16. Takashi Shimizu, Yoshinori Kogami, “Microwave characteristics of a conductor backed CPW by a home printed electronics technology with silver nanoparticle ink”),” 2018 Asia Pacific Microwave Conference Proceedings, FR2-103-4, Nov. 2018.
  17. 清水隆志, 石川 亮, 上田哲也, 大平昌敬, 岡崎浩司, 小松崎優治, 田村昌也, “[特別講演]2018年IEEE MTT-S 国際マイクロ波シンポジウム出席報告,” 信学技報, vol. 118, no. 308, MW2018-110, pp. 95-102, Nov. 2018.
  18. 角田亘汰, 清水隆志, 古神義則, “3Dプリンタで出力された誘電体円板のWGモード法によるミリ波複素誘電率測定,” 信学技報, vol., no. , MW2018-, pp. -, Dec. 2018. (発表予定)
  19. 池内裕章, 陳春平, 牛嶋優, 神岡純, 高野恭弥, 村田健太郎, 清水隆志,  “[特別講演]2018年ヨーロッパマイクロ波会議出席報告,” 信学技報, vol. , no. , MW2018-, pp. -, Jan. 2019. (発表予定)